Vans+ Series UV Curing Oven

Vans+ Series UV Curing Oven

Vans+ Series UV Curing Oven
  • UV curing oven
Vans+ serie of UV curing oven features Fusion® UV lamps by Heraeus to initiate fast ultraviolet light polymerization of adhesives and coatings in an efficient inline process.  Various beam widths are available to accommodate a wide range of substrate dimensions.

Features:
Unitronics PLC Controller
OIT touch screen interface
Single or double-sided processing
Dual zone conveyor with configurable cure and transfer speeds
SMEMA edge carrying chain conveyor
SMEMA communications interface
Maximum 4" top and bottom side component clearance
Standard hand crank conveyor adjust, and optional automatic conveyor width adjust
Fully enclosed for clean and quiet operation
Large access doors to all critical areas
Inlet air filtration system
Rail expansion compensation


  1. Lamps Fusion® UV lamps by Heraeus 300 watt/in. mercury bulb 8,000 hour bulb life guarantee
  2.  UV Beam Widths 167.64 mm, 335.28 mm, 502.92 mm (6.6 in., 13.2 in., 19.8 in.) 
  3. Conveyor Speed 0.305 m/min to 5.8 m/min (1 ft/min to 19 ft/min)
  4.  Working Width 50 mm to 500 mm (1.97 in. to 19.69 in.) 
  5. Lamp Height 51 mm to 152.4 mm (2 in. to 6 in.) above conveyor 
  6. Conveyor Height 890 mm to 965 mm from floor (35.04 in. to 38 in.) (SMEMA)
  7.  Exhaust Minimum 1000 cfm exhaust fan with low level flow alarm included 
  8. Power Requirements 220V, 230V, 380V, 400V – 50 Hz 208V, 220V, 230V, 240V – 60Hz 
  9. Certification CE certification available